Zte ZXR10 2918E User Manual

ZXR102900ESeriesCongurationGuide
CommandFunction
zte(cfg)#ping<A.B.C.D>[<0-65535>[<28-65535>[<1-255>[<0-65535>[<A
.B.C.D>]]]]]
Detectsthenetworkconnectivity
zte(cfg)#trace<A.B.C.D>[max-ttl<1-255>[min-ttl<1-255>[repeat
<1-65535>[source<A.B.C.D>[timeout<1-60>[udp-port<1-65535>]]]]]]
Routertrace,whichisusedtodetermine
thepathofIPdatamessagestoaccess
thedestination.
zte(cfg-router)#setipport<0-63>{enable|disable}Enablesordisableslayer-3interface.
zte(cfg-router)#setipport<0-63>ipaddress{<A.B.C.D/M>|<A.B.C.D><
A.B.C.D>}
SetsIPaddressandsubmaskoflayer-3
port.
zte(cfg-router)#setipport<0-63>mac<HH.HH.HH.HH.HH.HH>SetstheMACaddressoflayer-3port.
zte(cfg-router)#setipport<0-63>vlan<1-4094>SetstheVLANbindingwithlayer-3port.
zte(cfg-router)#iproute{<A.B.C.D/M>|<A.B.C.D><A.B.C.D>}<
A.B.C.D>[<1-15>]
Addsstaticroute.
zte(cfg-router)#arpadd<A.B.C.D><HH.HH.HH.HH.HH.HH><0-63>AddsstaticARP .
zte(cfg-router)#arpdelete<A.B.C.D>DeletesstaticARP .
zte(cfg-router)#arpipport<0-63>timeout<1-1000>
SetsARPentryagingtimebasedon
layer-3interface.
zte(cfg-router)#arpgratuitous-send<5-4294967295>
EnablesthefreeARPfunctionand
setstheperiodforsendingfreeARP
messages.
zte(cfg-router)#cleararpClearsdynamicARPentryinbatch.
zte(cfg-router)#cleariproute[{<A.B.C.D/M>|<A.B.C.D><A.B.C.D>}<A.B.C.
D>]
Clearsstaticroutingentry.
zte(cfg-router)#clearipport<0-63>[mac|ipaddress|vlan]Deletesipportconguration.
zte(cfg-router)#cleargratuitous-sendDisablethefreeARPfunction.
zte(cfg-router)#hardware-iproute{enable|disable}
Enablesordisablesthehardware
routingfunction.
zte(cfg-router)#showarp[static|dynamic|invalid|ipport<0-63>[static|
dynamic|invalid]|ipaddress<A.B.C.D>]
DisplaystheARPtableiteminformation
andfreeARPfunctionstatusaccording
tovariousrules.
showipport[<0-63>](allcongurationmodes)
Displaysipportlayer-3interface
conguration.
showiproute(allcongurationmodes)Displaysallroutinginformation.
showhardware-iproute(allcongurationmodes)
Displayshardwarerouting
conguration.
IPv4Layer3CongurationInstance
lCongurationDescription
4-62
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2918E Specifications

General

VLANs	4K
Jumbo Frame	9K
Power Supply	AC: 100~240V, 50~60Hz
Operating Temperature	0°C~45°C
Storage Temperature	-40°C~70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5%~95% (non-condensing)
Power Consumption	<=25W