Zte ZXR10 2918E User Manual

Chapter4ServiceConguration
Figure4-49PPCongurationInstance
lCongurationProcedure
zte(cfg)#setigmpsnoopingenable
zte(cfg)#setigmpsnoopingaddvlan1
zte(cfg)#setdhcpsnooping-optionenable
zte(cfg)#setdhcpsnoopingaddport1-3
lCongurationVerication
UseHost1tosendDHCPDiscoverpackets.Viewalarminformationontheswitch.
ThuJul117:53:182004Receivetoomanypacketsof'dhcp'fromport1
UseHost2toapplyforjoiningthemulticastgroup225.0.0.1.Viewthemulticastentity
onthedevice.
zte(cfg)#showigmpsnoopingvlan
Maximalgroupnumber:1024
Currentgroupnumber:1
NumVlanIdGroupLast_ReportPortMember
------------------------------------------------------------
11225.0.0.110.40.1.102-3
4.35LLDPConguration
LLDPOverview
TheLinkLayerDiscoveryProtocol(LLDP)isanewprotocoldenedinthe802.1ab.This
protocolallowsneighboringdevicestosendmessagestoeachothertoupdatephysical
topologyinformationandestablishManagementInformationBases(MIBs).TheLLDP
workowisdescribedbelow:
1.Thelocaldevicesendsitslinkandmanagementinformationtoaneighbordevice.
2.Thelocaldevicereceivesthenetworkmanagementinformationofaneighbordevice.
4-125
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2918E Specifications

General

VLANs	4K
Jumbo Frame	9K
Power Supply	AC: 100~240V, 50~60Hz
Operating Temperature	0°C~45°C
Storage Temperature	-40°C~70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5%~95% (non-condensing)
Power Consumption	<=25W