Zte ZXR10 2918E User Manual

Chapter5Management
Figure5-8SwitchCharacterSwitchRule
ConguringZGMP
TheZGMPcongurationincludesthefollowingcommands:
CommandFunction
zte(cfg-group)#setzdp{enable|disable}EnablesordisablesZDPfunction.
zte(cfg-group)#setzdp{port<portlist>|trunk<trunklist>}{enable|
disable}
EnablesordisablestheZDP
functionbasedonport/trunk.
zte(cfg-group)#setzdptimer<5-255>
Setsthetimeintervalforsending
ZDPpackets.
zte(cfg-group)#setzdpholdtime<10-255>SetsZDPholdtime.
showzdp(allcongurationmodes)DisplaysZDPglobalconguration.
showzdpneighbour(allcongurationmodes)
DisplaysZDPneighbor
information.
showzdpneighbourdetail(allcongurationmodes)
DisplaysZDPneighbordetailed
information.
zte(cfg-group)#setztp{enable|disable}
Enablesordisablestheglobal
ZTPfunction.
zte(cfg-group)#setztp{port<portlist>|trunk<trunklist>}{enable|
disable}
EnablesordisablestheZTP
functionbasedonport/trunk.
zte(cfg-group)#setztpvlan<1-4094>
SetsaVLANforcollecting
topologyinformation.
zte(cfg-group)#setztphop<1-128>
Setstherange(hopcount)of
collectingtopologyinformation.
zte(cfg-group)#setztptimer
Setstimeintervalforcollecting
topologyinformationperiodically
5-17
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2918E Specifications

General

Brand	Zte
Model	ZXR10 2918E
Category	Switch
Language	English