Zte ZXR10 2918E User Manual

ZXR102900ESeriesCongurationGuide
CommandFunction
zte(cfg-group)#setztpportdelay<1-100>
Setstheportdelayforforwarding
topologyrequests.
zte(cfg-group)#setztphopdelay<1-1000>
Setsthehopdelayforforwarding
topologyrequests.
zte(cfg-group)#ztpstart
Startscollectingtopology
information.
showztp(allcongurationmodes)DisplaysZTPconguration.
showztpdevice[<idlist>](allcongurationmodes)
Displaystheconguration
informationofZTPaccordingto
thedeviceID.
showztptopology(allcongurationmodes)
Displaysnetworktopologyby
simplegraph.
showztpmac<HH.HH.HH.HH.HH.HH>(allcongurationmodes)
Displaysdetailinformationof
specieddeviceaccordingtoMAC
address.
zte(cfg-group)#setgroupcommanderipport<0-63>[ip-pool
<A.B.C.D/M>]
Setsacommandswitch,species
alayer-3portnumberforcluster
managementandsetsIPaddress
poolforuserclustermanagement.
zte(cfg-group)#setgroupcandidateSetsaswitchascandidateswitch.
zte(cfg-group)#setgroupindependent
Setsaswitchasindependent
switch.
zte(cfg-group)#setgroupadd{mac<HH.HH.HH.HH.HH.HH>[<1-
255>]|device<idlist>}
Addsadevicewithspecied
memberIDfromcluster.
zte(cfg-group)#setgroupdeletemember<idlist>
Deletesadevicewithspecied
memberIDfromcluster.
zte(cfg-group)#setgrouphandtime<1-300>
Setsatimeintervalforhandshake
betweencommandswitchand
memberswitch.
zte(cfg-group)#setgroupholdtime<1-300>
Setseffectiveholdingtimeof
informationaboutswitchesin
cluster.
zte(cfg-group)#setgroupname<name>Setsclustername.
zte(cfg-group)#setgroupmac-mode{standard|extend[mac
<HH.HH.HH.HH.HH.HH>]}
Setstheprotocolbroadcast
addressmodeofcluster
managementasstandardmode.
zte(cfg-group)#setgroupsyslogsvr<A.B.C.D>
SetsIPaddressofinternalpublic
SYSLOGServerofcluster.
5-18
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2918E Specifications

General

VLANs	4K
Jumbo Frame	9K
Power Supply	AC: 100~240V, 50~60Hz
Operating Temperature	0°C~45°C
Storage Temperature	-40°C~70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5%~95% (non-condensing)
Power Consumption	<=25W