Description
BusinessPhone – Dialog 4425 IP Vision12
Display information
The graphical display assists your actions on the phone with step-
by-step instructions.
The fields in the display consists of the following information:
• The top area is the tab field, which is used to indicate the tab
the user has selected by using the navigation keys.
• The middle area is divided into several fields, showing:
–the time and date
– the user name and the extension number,
– icons and a volume level bar
– the traffic state or the temperature (if a temperature sensor
is connected to the system)
– Called number and name for internal calls
– Called number for external calls
– Calling number and name for internal and external calls *)
– Instead of the Calling/Called name & number additional
information such as absence reason, diversion state etc.
can be shown.
If the SOS call function is enabled, the text:
’For SOS calls, dial xxx’ is shown.
• The lower line presents lead texts for the menu keys.
When an information ends with three dots (...), this means that the
system is working or waiting for your action. When an information
ends with an exclamation mark (!), this means that no further action
is possible.
*) The provisioning of external calling numbers is network
dependent. Even when it is provided it might happen that callers
are suppressing their numbers, in this case the display only shows
’Incoming...’. If a name is available to the external caller‘s number
in your system, it is also shown on the display. (Please contact your
system administrator whether the feature ’Name presentation for
external calls’ is available in your system).
Settings CallList Contacts
CorpDirectory Web
<Traffic state> <Time> <Date>
<User name &
<
Calling/Called name & number
> Extension number>
For SOS calls, dial xxx <Icons
<Menu key 1> <Menu key 2> <Menu key 3> <Menu key 4>
To Next Page
Loading...
Need help?
General