Installation
A43/A44 16 2CMC48001M0201
User Manual Revision: C
2.1 Mounting the Meter
This section describes different ways to mount the A43/A44 meters. For some
methods of mounting additional accessories are needed. For further information
about accessories, refer to the Main Catalog (2CMC480001C0201).
The A43/A44 meters are intended to be mounted on a DIN-rail (DIN 50022). If
this method of mounting is used no extra accessories are needed and the meter is
fastened by snapping the DIN-rail lock onto the rail.
The following picture shows a DIN-rail.
Wall mounted The recommended way to mount the meter on a wall is to mount a separate DIN-
rail on the wall and then mount the meter on the rail.
To Next Page
Need help?
General
