ABB A43 User Manual

Meter Settings
A43/A44 38 2CMC48001M0201
User Manual Revision: C
4 configurable I/Os
4 static I/Os
1 static I/O
Out 2
Out 2
Out 3
Out 4
4.1.8 Setting Currency/CO
2
By setting a conversion factor for Currency/CO
2
, kWh is converted to
currency and/or kg CO
2
.
To set currency/CO
2
, perform the following steps:
1. Choose the Settings icon in the main menu, press .
2. Choose “Currency/CO2” (Curr/CO2 on the display), press .
3. The display will show price in currency per unit.
4. Press to set the the conversion factor and the quantity.
5. Use to get to the next page. The page will display the CO
2
emissions
in kg per kWh.
6. Press to set the conversion factor for CO
2
.
4.1.9 Setting M-Bus
To set the wired M-Bus interface, perform the following steps:
1. Choose the Settings icon in the main menu, press .
2. Choose “MBus”, press .
3. Press once to get to the next menu. The display will show the baudrate.
See Table 4:5 for baudrate options. Set baudrate.
4. Press once to get to the next menu. The display will show the address.
See Table 4:5 for address range. Set address.
5. Press once to get to the next menu. The display will show the access
level. See Table 4:5 for options. Set the access level.
6. Press once to get to the next menu. The display will show the Send
status info. See Table 4:5 for options. Set the send info status.
7. Press once to get to the next menu. The display will show if the
password is to be reset. See Table 4:5 for options. Set the option.
4.1.10 Setting RS-485
The RS-485 uses the EQ-Bus and the Modbus protocols to communicate. To set the
RS-485 communication depending on protocol, perform the following steps:
Step
EQ-Bus
Modbus
1
Choose the Settings icon in the
Choose the Settings icon in the
main menu, press .
main menu, press .
2
Choose communication interface.
Choose communication inter-
face.
3
Choose EQ-Bus.
Choose Modbus.

ABB A43 Specifications

General

Brand	ABB
Model	A43
Category	Measuring Instruments
Language	English