Functions in the main Menu 33
Adding parameters to the Home view
When you view a read-only parameter in the Parameters menu, you can add the
parameter to the Home view.
•Press (Add to view) to open the
Home view in the editing mode then you
can add the parameter to an empty display
slot or replace an existing parameter with it.
•Press (Back) to go back to the
parameter view.
Editing the Home view functions are described in
more detail in Editing the contents of the Home
view (page 44).
Editing parameters
You can edit parameter values with the arrow keys.
1. Press
(Select) to select the desired parameter from the list.
2. Press (Edit).
3. Use and to change the value.
4. Press (Save) to save the value, or press (Cancel) to exit the
parameter view and discard any changes.
5. Press + to restore the default value of the parameter (this does not save it).
See the sections below for more information on editing specific parameter types.
To Next Page
Loading...
Need help?
General
