ABB ACS-AP-x User Manual

60 Panel-to-PC USB connection
Transferring files between the control panel and a PC
1. Connect the control panel to a PC with a USB cable as instructed in Connecting
control panel to PC USB (page 58).
2. If Windows prompts you to install USB drivers, install them as instructed in Drive
composer user’s manual (3AUA0000094606 [English]).
The control panel appears as an MTP device in Windows Explorer.
3. Open ABB Drives Assistant control panel with Windows Explorer, and go to the
directory where the files are stored.
• Screenshots are stored in: ABB Drives Assistant control panel\ABB Drives
Assistant control panel_a\screen
• Backup files are stored in: ABB Drives Assistant control panel\ABB Drives
Assistant control panel_a\backup
You can copy files to and from the folders just like any other files with Windows
Explorer.

ABB ACS-AP-x Specifications

General

Brand	ABB
Model	ACS-AP-x
Category	Control Panel
Language	English