ABB i-bus KNX User Manual

ABB i-bus
®
KNX
Commissioning
166 2CDC508134D0202 | FCA/S 1.x.x.1
3.2.3.20.1 Parameter window Time
All settings for the Time: Staircase lighting function are made in this parameter window.
This parameter window is visible if the parameter Enable function Time has been enabled in Parameter
window H: Output, p. 163.
Explanations of the Time functions and sequences can be found in Planning and application, p. 237 ff.
Also observe the Function diagram, p. 245, which indicates the switching and sequence priorities.
Time function
Staircase light
 Staircase lighting: The value that switches the staircase lighting on and off can be parameterized. The
staircase lighting time starts when the function is switched on. It is switched off immediately after the
staircase lighting time ends.

ABB i-bus KNX Specifications

General

Brand	ABB
Model	i-bus KNX
Category	Controller
Language	English