ABB i-bus KNX User Manual

ABB i-bus
®
KNX
Commissioning
170 2CDC508134D0202 | FCA/S 1.x.x.1
3.2.4 Parameter window Inputs a...c
3.2.4.1 Parameter window Enable inputs a…c
Settings for enabling and description of inputs a...c:
Note
In the following, the setting possibilities of inputs a…c are explained using input a as an example.
The setting possibilities are identical for all inputs.
Input a
Input b
Input c
Options:
Disabled
Switch sensor
Value/forced operation
PT100 2-cond. technology [-50…+150 °C]
PT1000 2-cond. technology [-50…+150 °C]
KTY [-50…+150 °C]
The operating mode of the input is set with this parameter. The respective parameter window a: xxx also
becomes visible with the selection of an operating mode.
Description (40 characters)
With this parameter, it is possible to enter a text of up to 40 characters in length for identification in the
ETS.
Note
The text which is entered is used to provide help, in order to obtain an overview of the inputs when they
are fully assigned and to indicate the function assigned to the input. The text is purely for informative
purposes and has no further function.

ABB i-bus KNX Specifications

General

Brand	ABB
Model	i-bus KNX
Category	Controller
Language	English