ABB i-bus KNX User Manual

ABB i-bus
®
KNX
Commissioning
FCA/S 1.x.x.1 | 2CDC508134D0202 173
3.2.4.2.1 Parameter Distinction between long and short operation – No
If the option No has been selected with the parameter Distinction between long and short operation, the
following parameters appear in Parameter window a: Switch sensor, p. 171:
Opening the contact -> Event 0
Closing the contact -> Event 1
<−−− NOTE
Activate minimum signal duration
Options:
No
Yes
Selection Yes:
Dependent parameters:
On closing the contact
in [0...65,535] X 0.1 s
Options:
0…10…65,535
On opening the contact
in [0…65,535] x 0.1 s
Options:
0…10…65,535

ABB i-bus KNX Specifications

General

Brand	ABB
Model	i-bus KNX
Category	Controller
Language	English