If the Central Account Management activation fails, the activate parameter will be
reset and Central Account Management must be activated again and a failure
message will be indicated in PCM Output window.
When Central Account Management is activated, any ongoing sessions with the
IED will continue until they are closed.
5.3.1
Manual configuration of Central Account Management
GUID-D4123E80-3D91-4767-9B67-5936CF1030D5 v1
It is possible to edit Central Account Management configuration parameters and
modify them (if needed) in PCM600. In order to edit configuration parameters,
right click on the Device and select Edit as shown below.
IEC15000288 V1 EN-US
Figure 49: Edit configuration
The following screen appears, where in which user can edit the Central Account
Management configuration parameters and/or manually change the certificate.
IEC15000289 V1 EN-US
Figure 50: Local configuration
1MRK 511 399-UEN B Section 5
Central Account Management
670 series 2.2 IEC 59
Cyber security deployment guideline
To Next Page
Loading...
Need help?
General
