A connectivity package includes all the data which is used to describe the
protection relay. For example, it contains a list of the existing parameters, data
format used, units, setting range, access rights and visibility of the parameters.
In addition, it contains code which allows the software packages that use the
connectivity package to properly communicate with the protection relay.
3.9.2 PCM600 and relay connectivity package version
• Protection and Control IED Manager PCM600 Ver. 2.12 or later
• REX640 Connectivity Package Ver. 1.3.0 or later
Download connectivity packages from the ABB Web site
www.abb.com/
mediumvoltage
or directly with Update Manager in PCM600.
3.10 Modification Sales
Modification Sales is a concept that provides modification support for already
delivered relays. Under Modification Sales it is possible to modify both the hardware
and software capabilities of the existing relay. The same options are available as
when a new relay variant is configured and ordered from the factory: it is possible
to add new hardware modules into empty slots, change the type of the existing
modules within the slots or add software functions by adding application and, if
necessary, add-on packages. If it is needed to use the possibilities provided by the
Modification Sales concept, please contact your local ABB unit.
REX640 overview
1MRS759118 D
30 REX640
Operation Manual
To Next Page
Need help?
General
