ABB RELION REX640 User Manual

4.10 Measurements and phasor diagrams
4.10.1 Viewing measurements
The Measurements page is usually one of the Operator pages.
1. Swipe the LHMI screen until the Measurement page is shown. The number of
measurements on the Measurement page depends on the LHMI configuration
made with GDE. If there are more measurements configured than fitting on the
screen at a time, a vertical scroll bar is shown on the right of the measurement
list window.
2. Swipe the list vertically to see the remaining measurements. If configured with
GDE, warning or alarm limits are indicated in the individual measurement bars
with dash or solid lines. Measurement with bad quality is shown by grey value in
parentheses.
Figure 22: Measurements page
4.10.2 Viewing phasor diagrams
Phasor diagrams can be found through the Measurements page.
1. Tap Phasors at the bottom of the page.
1MRS759118 D
Using HMI
REX640
Operation Manual
43

ABB RELION REX640 Specifications

General

Brand	ABB
Model	RELION REX640
Category	Protection Device
Language	English