Why does my Abov Motherboard show a Power Check Vddd or Vpp error?
If you see a 'Power Check Vddd' or 'Vpp' error on your Abov Motherboard, it means the VDDD/VPPS voltage supplied was incorrect. This can also happen if the voltage level on the target board dropped too much during on-board programming due to high current consumption, or if the target board is short-circuited during on-board programming.
What to do if my Abov E-PGM Serial shows 'No device-ID Read-ID' error?
If your Abov Motherboard displays 'No device-ID Read-ID == 00xxxxxxxxxx', the wrong device might be selected, or the VDD/GND or signals are not properly connected. Ensure the correct device is selected.
What does 'Fail::Ext.. Power On Remove Ext.. Power' mean on my Abov Motherboard?
If you encounter a 'Fail::Ext.. Power On Remove Ext.. Power' error with your Abov Motherboard, it means the target board is being supplied with external power during on-board programming. Remove the external power to resolve this issue.
General| Brand | Abov |
|---|---|
| Model | E-PGM Serial |
| Category | Motherboard |
| Language | English |
To Next Page
