Abov E-PGM Serial User Manual

Functions
6 LCD screen for information display—device name, checksum data, and options. PASS/FAIL is
shown as a result of programming, accompanied by an error description in case of failure
7 40-pin DIP TEXTOOL socket for single chip programming mode
8 LED indicator showing the current status when writing is complete (Red: FAIL / Green: PASS)
9 5-pin Molex 5264 connector for the interface with handler equipment
10 USB mini-B connector to a PC
11
Power adaptor connector for the 15V/1A external power
12 System power switch
2.3.2 E‐GANG4/E‐GANG6
E-GANG4 and E-GANG6 are standalone-type universal gang programmers capable of programming
ABOV’s all microcontroller series in gang mode, which enables programming multiple devices at once.
E-GANG4 and E-GANG6 consist of a main programmer unit, target device socket, and socket adaptor
parts. When in on-board programming mode, they can be used in connection with an external handler
or manufacturing equipment without using the socket and the socket adaptor.
Figure 3: E-GANG4 exterior view
Figure 4: E-GANG6 exterior view
Version 1.0.0 Page 9 / 33 E-PGM+ E-GANG4/E-GANG6 E-PGM Serial

Abov E-PGM Serial Specifications

General

Brand	Abov
Model	E-PGM Serial
Category	Motherboard
Language	English