Functions
Figure 1: E-PGM+ with target socket module
Exterior features of E‐PGM+
Figure 2: E-PGM+ top and side views for function description
1 10-pin IDC connector for in-system programming (ISP)
2 RS-232C serial communication port (external bar code reader interface port)
3
SWD port for firmware update and development purposes (not for use)
4
Button for programming the target device
5 Button for reading the target device
E-PGM+ E-GANG4/E-GANG6 E-PGM Serial Page 8 / 33 Version 1.0.0