Key Component Upgrades
60 User’s Guide
Installing Memory
Follow these steps to install memory:
1. Turn off the computer, unplug the AC adapter (if
connected) and remove the battery pack. Then turn the
computer over to access its base.
2. Remove the screws from the memory door; then lift up
and remove the memory door.
3. Insert the memory module diagonally into the slot, then
gently press down until it clicks into place.
128 MB 0 MB 128 MB
128 MB 32 MB 160 MB
128 MB 64 MB 192 MB
128 MB 128 MB 256 MB
DIMM 1 DIMM 2 Total Memory
510.book : 510-3.fm Page 60 Thursday, March 4, 1999 1:03 PM
To Next Page
Loading...
Need help?
General
