1 Getting started
Acer n20 tour
4
NOTE:
Refer to "Personal" on page 122 for instructions on how to reassign the hardware buttons to
other applications installed on your handheld.
If your handheld is turned off, pressing any Quick button turns on the handheld and opens
the program assigned to that button.
Using the backlight
If lighting conditions make it difficult for you to see the information on your
handheld, use the backlight to illuminate your screen.
You can change the backlight settings. Refer to "System" on page 126.
To activate the backlight:
• Press the power button and hold it down for about two seconds. Release the
button when the backlight turns on.
To turn off the backlight:
• Press the power button and hold it down for two seconds. Release the button
when the backlight turns off.
6 Directional pad Enables multi-directional scrolling in various menus and
applications. Press the center of the pad on to simulate the
function of the Enter key.
7 Quick button for
Contacts
Activates the Contacts program.
For more information on this program, refer to page 36.
8 Quick button for
Inbox
Activates the Inbox program.
For more information on this program, refer to page 43.
9 Microphone Inputs audio into your handheld.
10 Internal speaker Outputs sounds from your handheld.
No. Component Description