DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
Manufacturer’s Name: Agilent Technologies, Inc.
Manufacturer’s Address: 1900 Garden of the Gods Road
Colorado Springs, Colorado
80907 U.S.A.
Declares, that the product
Product Name: Digitizing Oscilloscope Family
Model Number(s): 54830B/D, 54831B/D, and 54832B/D
Product Option(s): This declaration covers all options of the above product
Conforms to the following product standards:
EMC Standard Limit
IEC 61326-1:1997+A1:1998/EN 61326-1:1997+A1:1998
CISPR 11:1990 / EN 55011:1991 Group 1, Class A
[1][2]
IEC 61000-4-2:1995+A1:1998/EN 61000-4-2:1995 4kV CD, 8kV AD
IEC 61000-4-3:1995/EN 61000-4-3:1995 3V/m, 80-1000 MHz
IEC 61000-4-4:1995/EN 61000-4-4:1995 0.5kV signal lines, 1kV power lines
IEC 61000-4-5:1995/EN 61000-4-5:1995 0.5kV line-line, 1kV line-ground
IEC 61000-4-6:1996/EN 61000-4-6:1996 3V, 0.15-80 MHz
IEC 61000-4-11:1994/EN 61000-4-11:1994 1 cycle, 100%
Canada: ICES-001:1998
Australia/New Zealand: AS/NZS 2064.1
Safety IEC 61010-1:1990+A1:1992+A2:1995/EN 61010-1:1993+A2:1995
Canada: CSA-C22.2 No. 1010.1:1992
Additional Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC
and the EMC Directive 89/336/EEC (including 93/68/EEC) and carries the CE-marking accordingly (European Union).
[1]
The product was tested in a typical configuration with Agilent Technologies test systems.
[2]
The product meets CISPR requirements using “type test” specified in IEC 61326-1 edition 1.1, section 3.1.
Date: 2002-6-4
For further information, please contact your local Agilent Technologies sales office, agent, or distributor.
Ken Wyatt/Product Regulations Manager
To Next Page
Loading...
Need help?
General
