Agilent Technologies 54831A User Manual

Using the Oscilloscope
To clear the waveform display
3-38
To clear the waveform display
• Click the clear display button at the bottom of the waveform display.
See figure 3-28.
You can still use the Clear Display key on the front panel while the graphical
interface is enabled.
Clearing the display removes all displayed waveform data in preparation for
another acquisition. It also resets all automatic measurements and
measurement statistics.
Figure 3-28
Clearing the Display
Click this button to
clear the waveform
display

Agilent Technologies 54831A Specifications

General

Brand	Agilent Technologies
Model	54831A
Category	Test Equipment
Language	English