To Next Page

To Previous Page

OmniSwitch 6850 Series Chassis and Hardware Components Status LEDs

OmniSwitch 6850 Series Hardware Users Guide August 2007 page 2-55

10/100/1000 LEDs

There is a single LED for each corresponding 10/100/1000 Mbps port. It displays solid green (1000 Mbps)

for a valid link; displays blinking green when transmitting or receiving packets in a link up state for non-

PoE. It displays solid amber (10/100 Mbps) for a valid link; displays blinking amber when transmitting or

receiving packets in a link up state for PoE.

100/1000 SFP LEDs

There is a single LED for 100/1000 Mbps SFP. It displays solid green (1000 Mbps) for a valid link;

displays blinking green when transmitting or receiving packets in a link up state; off when no link is

detected. It displays solid amber (10/100 Mbps) for a valid link; displays blinking amber when transmit-

ting or receiving packets in a link up state.

10000 XFP1 LEDs

This LED corresponds to XFP connector 25 on OS6850-P24X switches and port 49 on OS6850-P48X

switches. It displays solid green when the port is up and blinking green when the port is transmitting or

receiving packets in a link up state. This LED is off when no link is detected.

10000 XFP2 LEDs

This LED corresponds to XFP connector 26 on OS6850-P24X switches and port 50 on OS6850-P48X

switches. It displays solid green when the port is up and blinking green when the port is transmitting or

receiving packets in a link up state. This LED is off when no link is detected.

Alcatel-Lucent OmniSwitch 6850 Series User Manual

Questions and Answers: