FX Model - Beat Delay
Beat Delay includes two delays (left and right) where the speed of the repeats is
set as a musical division or note value of a BPM value.
Width – Adjust from centre (both delays are heard in the centre) to full width (left
is only heard in the left output and right is only heard in the right output).
Width has no effect if Beat Delay is inserted into a mono channel.
Note Left/Right – Select and adjust with the touchscreen rotary (CQ-12T, CQ-18T)
or touch and drag (CQ-MixPad) to set division or note value.
Link – Link the Note Left/Right values.
Low/High Cut – Cut Low or High frequencies from the sound being repeated.
BPM – Tap multiple times on the BPM value to set, or select and adjust with the
touchscreen rotary (CQ-12T, CQ-18T) or touch and drag (CQ-MixPad).
Feedback – Adjust the level of the repeats feeding back into the delay.
To Next Page
Loading...
Need help?
General
