OUTPUT / FBA
Detect
The Feedback Assistant detects feedback and applies narrow filters to prevent it.
Detect – Disable the ‘HOLD’ box to start detecting feedback frequencies; Enable
the ‘HOLD’ box to pause feedback frequency detection.
Mode – Select whether the next filter to be added (when feedback is detected) will
be in Fixed or Live mode.
Live Recovery – Adjust the speed at which Live filters are currently recovering.
Can be set to ‘Off’ to temporarily freeze live filters.
RTA – Enable this option to see a Real Time Analyser in the FBA graph.
In/Out – Select to enable or disable the Feedback Assistant.
To Next Page
Loading...
Need help?
General
