Convert a Quick Channel to a Complete Channel
Any Quick Channel can be converted to a Complete Channel at any time without
any change to the audio.
This allows Quick Channels to be used for a fast setup, but which can then be
switched to Complete Channels for control of individual parameters if desired.
Open the dropdown menu from the top right-hand corner when in a bank view with
the Quick Channel selected, or when viewing the Quick Channel controls of the
channel to be converted, then select Convert.
A pop-up explaining what will happen will appear and give the option to apply or
cancel conversion.
Note that it is not possible for Complete Channels to be converted to Quick
Channels.
To Next Page
Loading...
Need help?
General
