Rockwell Automation Publication 5069-UM004A-EN-P - April 2019 17
Chapter 1
Digital Module Operation in a Control System
Logix 5000â„¢ controllers use Compact 5000â„¢ I/O digital modules to control
devices in a control system.
Compact 5000 I/O digital modules use removable terminal blocks (RTBs) to
connect field-side wiring. You use the Studio 5000 Logix Designer® application
to configure the modules.
Compact 5000 I/O digital modules use the Producer/Consumer network
communication model. This communication is an intelligent data exchange
between modules and other system devices in which each module produces
data without first being polled.
Topic Page
Controller and Software Compatibility 18
Types of Modules 21
Module Overview 22
Local I/O Modules or Remote I/O Modules 24
Secure Access to the System 28
Ownership 29
Construct a System 31
Power the Modules 34
Configure the Modules 40
Input Module Operation 49
Output Module Operation 51
Listen Only 56
Protected Operations 57
Considerations Specific to Safety Modules 58
IMPORTANT Controller and programming software compatibility requirements apply
when you use Compact 5000 I/O digital modules.
For more information on controller and software compatibility, see
Controller and Software Compatibility on page 18.
To Next Page
Loading...
Need help?
General
