Rockwell Automation Publication 5069-UM004A-EN-P - April 2019 231
Appendix B
Module Tag Definitions
Module tags are created when you add a module to the Logix Designer
application project.
The set of tags that are associated with any module depends on the choices that
you make in the Module Definition dialog box. For example, if you use a Listen
Only Connection, the Logix Designer application creates only Input tags for
that module.
There are four sets of tags.
• Configuration
• Event Input - 5069-IB16F and 5069-IB6F-3W modules only
• Event Output - 5069-IB16F and 5069-IB6F-3W modules only
•Input
• Output
Topic Page
Name Conventions 232
Access the Tags 232
5069-IA16 Module Tags 233
5069-IB16 Module Tags 235
5069-IB16F Module Tags 238
5069-IB6F-3W Module Tags 247
5069-OA16 Module Tags 256
5069-OB8 Module Tags 258
5069-OB16 Module Tags 260
5069-OB16F Module Tags 262
5069-OW4I, 5069-OW16, and 5069-OX4I Module Tags 266
5069-IB8S and 5069-IB8SK Module Tags 268
5069-OBV8S and 5069-OBV8SK Module Tags 270
IMPORTANT The tables that are in this section list all tags available with a module. Not all
tags in the list are used when that module type is added to a project. Tag use
varies by module configuration.
To Next Page
Loading...
Need help?
General
