Rockwell Automation Publication 750-IN100B-EN-P - July 2017 25
Receiving, Handling, and Storage Chapter 2
Storage
PowerFlex 755T products are shipped from the factory wrapped in plastic to
help prevent dirt and dust from entering the enclosure. If you must store the
equipment after you receive it, take the following precautions.
• Do not remove the protective plastic wrap.
• Do not store the product outdoors.
• Do not store the product in an area where it is exposed to a corrosive
atmosphere.
• Store the product in an area that is clean and dry.
• Store the product in a conditioned building with adequate air
circulation.
• Maintain a storage temperature of -40…+70 °C (-40…+158 °F).
• Maintain a relative humidity of 5…95% non-condensing.
• Heating and moisture protection devices must be used if the rate of
change in relative humidity and/or ambient temperature may lead to
condensation on the stored equipment.
• If the product is stored for a long time, reform the bus capacitors before
use. For instructions on how to reform the bus capacitors, visit
http://www.rockwellautomation.com/support
.
ATTENTION: PowerFlex 755T products are designed for indoor applications
and do not have sufficient packaging for outdoor storage. Store PowerFlex
755T products in a heated building that offers adequate air circulation and
protection from dirt and moisture.
To Next Page
Loading...
Need help?
General
