Rockwell Automation Publication 750COM-UM009A-EN-P - May 2017 117
Troubleshooting Chapter 6
359 DHCP Rebind The interface rebinded its network address lease with
the DHCP Server.
360 DHCP Release The interface network address lease expired.
361 Net Sent Reset The interface received a reset command from the
network.
362 Net I/O Open The I/O connection from the network to the interface has
been opened.
363 Net I/O Idle The interface received I/O connection ‘idle’ packets from
the network.
364 Net I/O Close The I/O connection from the network to the interface
was closed.
365 Net I/O Timeout The interface I/O connection has timed out.
366 Net I/O Abort The interface I/O connection was aborted because the
datalink configuration was changed.
367 PCCC I/O Open The interface began receiving PCCC control messages
after the PCCC Control Timeout was set to a nonzero
value.
368 PCCC I/O Close The device that sends PCCC control messages to the
interface (for example, the Control Bar feature in CCW)
has set the PCCC Control Timeout to zero.
369 PCCC I/O Timeout The interface has not received a PCCC control message
before the PCCC Control Timeout.
370 Msg Ctrl Open The timeout attribute in the CIP-based network
Assembly Object was set to a nonzero value. This allows
control messages to be sent to the interface via the CIP-
based network Assembly Object.
371 Msg Ctrl Close The timeout attribute in the CIP-based network
Assembly Object was set to zero, disallowing control
messages to be sent to the interface via the CIP-based
network Assembly Object.
372 Msg Ctrl Timeout The interface has not received a control message via the
CIP-based network Assembly Object before the object
timeout attribute triggered.
375 Net Ring Up The Device Level Ring (DLR) status is Normal.
376 Net Ring Down The Device Level Ring (DLR) status is Faulted.
Table 17 - Interface Diagnostic Items (continued)
Code Event Description
To Next Page
Loading...
Need help?
General
