Chapter 3: Configuration Options
USB Matrix Page
Click View> USB Matrix to access the page shown in Figure 10. This page displays all discovered devices on your network which
feature USB support. Encoders are listed horizontally across the top of the page while Decoders are listed vertically down the left
side. Use this page to route which Encoder the Decoder's KVM is connected to by simply clicking the common cell on the matrix,
followed by clicking the Take button. Clicking a unit’s name takes you to the configuration pages for that device. Options are
described in Tab le 5
.
FIG. 10
Viewing Equipment with USB Support
TABLE 5 USB Matrix Page Option Descriptions
Option Description Notes
Hide inactive checkbox Enable to hide any discovered units that are currently
not communicating (off-line).
Hide NVR checkbox Enable to hide all discovered N6123 Network Video
Recorders on this network.
Launch Script
drop-down
Choose a script to launch from the drop-down menu.
Scripts are created using the Script Builder.
See Script Builder Page on page 21 for more
information.
All Units drop-down If you have created any User-Groups, they will be
available for selection in this drop-down menu. Once a
group is selected, only the units in that group are
displayed in the matrix.
See
User-Groups Page on page 33 for more
information.
Cancel button Click to cancel any pending changes.
Take button Click to accept changes made on this page.
To Next Page
Loading...
Need help?
General
