Asus M2N-L User Manual

5-16 Chapter 5: Software support
5.5.5 Clearing the MBR
You will lose all data when you clear the MBR!
To clear the MBR:
1. From the
Array List, use the up or down arrow keys to select a RAID set, then
press <ENTER>. The RAID set details appear.
[Ctrl-X] Exit [↑↓] Select [B] Set Bootable [N] New Array [ENTER] Detail
MediaShield BIOS Apr 20 2007
- Array List -
Boot Status Vendor Array Size
No Healthy NVIDIA STRIPE XXX.XXG
NO Healthy NVIDIA MIRROR XXX.XXG
2. When the array details appear, then press <C>. A conrmation message
appears.
3. Press <Y> to clear the MBR, or press
<N> to cancel.
Clear MBR?
[Y] Yes [N] NO
[R] Rebuild [D] Delete [C] Clear MBR [ENTER] Return
Array 4 : NVIDIA MIRROR XXX.XXG
- Array Detail -
RAID Mode: Mirrored
Stripe Width: 1 Stripe Block: 64K
Port Index Disk Model Capacity
0.0 0 XXXXXXXXXXXXXXXXX XXX.XXGB
1.0 0 XXXXXXXXXXXXXXXXX XXX.XXGB

Asus M2N-L Specifications

General

ECC	Yes
Number of memory slots	4
Maximum internal memory	8 GB
Processor socket	Socket AM2
Processor manufacturer	AMD
USB 2.0 connectors	1
Number of SATA connectors	6
Manageability features	ASWM 2.0
Controller interface type	Serial ATA I/II
Controller 2nd interface type	UltraATA-100/133
USB 2.0 ports quantity	2
Motherboard form factor	ATX
Maximum graphics card memory	32 MB
Networking features	Dual Gigabit Ethernet
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	10 - 35 °C
RAID levels	0, 1, 0+1, JBOD