Asus M2N-L User Manual

ASUS M2N-L 5-13
5.5.3 Rebuilding a RAID set
To rebuild a RAID set:
1. From the
Array List, use the up or down arrow keys to select the RAID set you
want to rebuild, then press <ENTER>. The RAID set details appear.
MediaShield BIOS Apr 20 2007
- Array List -
Boot Status Vendor Array Size
YES Healthy NVIDIA STRIPE XXX.XXG
NO Healthy NVIDIA MIRROR XXX.XXG
[Ctrl-X]Exit [↑↓]Select [B]Set Bootable [N]New Array [ENTER] Detail
2. Press <R>. The RAID details appear.
[R] Rebuild [D] Delete [C] Clear MBR [ENTER] Return
Array 3 : NVIDIA MIRROR XX.XXGB
- Array Detail -
RAID Mode: Mirrored
Stripe Width: 1 Stripe Block: 64K
Port Index Disk Model Capacity
0.0 1 XXXXXXXXXXXXXXXXX XXX.XXGB
1.1 0 XXXXXXXXXXXXXXXXX XXX.XXGB

Asus M2N-L Specifications

General

ECC	Yes
Number of memory slots	4
Maximum internal memory	8 GB
Processor socket	Socket AM2
Processor manufacturer	AMD
USB 2.0 connectors	1
Number of SATA connectors	6
Manageability features	ASWM 2.0
Controller interface type	Serial ATA I/II
Controller 2nd interface type	UltraATA-100/133
USB 2.0 ports quantity	2
Motherboard form factor	ATX
Maximum graphics card memory	32 MB
Networking features	Dual Gigabit Ethernet
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	10 - 35 °C
RAID levels	0, 1, 0+1, JBOD