Asus M2N-L User Manual

ASUS M2N-L 4-29
4.6 Boot menu
The Boot menu items allow you to change the system boot options. Select an item
then press <Enter> to display the sub-menu.
Boot Settings
Boot Device Priority
Boot Settings Conguration
Security
4.6.1 Boot Device Priority
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
Conguration options: [1st Floppy Drive] [ATAPI CD-ROM] [Hard Drive] [Network:
B05 D00 Yukon Boot Agent] [Network:B06 D00 Yukon Boot Agent] [Disabled]
Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [ATAPI CD-ROM]
3rd Boot Device [Hard Drive]
4th Boot Device [Network:B05 D00 Yu]
5th Boot Device [Network:B06 D00 Yu]
Species the boot
sequence from the
available devices.
A device enclosed
in parenthesis has
been disabled in the
corresponding type
menu.
Species the Boot
Devices Priority
sequence.
A virtual oppy disk
drive (Floppy Drive
B:) may appear when
you set the CD-ROM
drive as the rst boot
device.
[Network:B05/B06 D00 Yukon Boot Agent] option appears only when the item
Onboard Marvell8056 Lan B/A - Onboard Lan BootROM is set to [Enabled].
Refer to section 4.4.3 Onboard Devices Conguration for settings.

Asus M2N-L Specifications

General

ECC	Yes
Number of memory slots	4
Maximum internal memory	8 GB
Processor socket	Socket AM2
Processor manufacturer	AMD
USB 2.0 connectors	1
Number of SATA connectors	6
Manageability features	ASWM 2.0
Controller interface type	Serial ATA I/II
Controller 2nd interface type	UltraATA-100/133
USB 2.0 ports quantity	2
Motherboard form factor	ATX
Maximum graphics card memory	32 MB
Networking features	Dual Gigabit Ethernet
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	10 - 35 °C
RAID levels	0, 1, 0+1, JBOD