1-6
Chapter 1: Product Introduction
Chapter 1
Layout contents
Connectors/Jumpers/Buttons and switches/Slots Page
1. DDR4 sockets 1-8
2. ATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1) 1-28
3. Smart Ride Through (SmaRT) setting (3-pin SMART_PSU1) 1-21
4. Power Supply SMBus connector (5-pin PSUSMB1)
1-32
5. CPU, front, and rear fan connectors (4-pin CPU_FAN1; 4-pin
REAR_FAN1; 4-pin FRNT_FAN1-4)
1-27
6. USB 3.0 connectors (20-1 pin USB3_12, USB3_34) 1-25
7. System Management Bus (SMBUS) connector (5-1 pin SMBUS1) 1-24
8. ME rmware force recovery setting (3-pin ME_RCVR1)
1-20
9. PCH_MFG1 Setting (3-pin PCH_MFG1)
1-19
10. TPM connector (14-1 pin TPM1) 1-27
11. M.2 socket 3 1-29
12. Serial General Purpose Input/Output connector (6-1 pin SGPIO1) 1-29
13. Serial ATA 6.0 Gbps connectors (7-pin SATA 6Gbps_1-8
connectors [Gray])
1-23
14. SATADOM power setting (3-pin DOM1_PWR1, DOM2_PWR2) 1-21
15. System panel connector (20-1 pin PANEL1) 1-30
16. Auxiliary panel connector (20-2 pin AUX_PANEL1) 1-31
17. Chassis intrusion connector (2-pin INTRUSION) 1-32
18. USB 2.0 connector (10-1 pin USB78) 1-26
19. Clear RTC RAM (3-pin CLRTC1) 1-18
20. Serial port connector (10-1 pin COM1) 1-22
21. Hard disk activity LED connector (4-pin HDLED1) 1-25
22. Q-Code LEDs (QCODE1) 1-14
23. VGA connector (16-1 pin VGA_HDR1) (for P10S-M WS/IPMI-O
only)
1-23
24. Front panel audio connector (10-1 pin AAFP1) 1-24
25. Digital audio connector (4-1 pin SPDIF_OUT1) 1-22
26. ASMB8 connector (14-1 pin ASMB8) (for P10S-M WS/IPMI-O
only)
1-33
27. VGA controller setting (3-pin VGA_SW1) (for P10S-M WS/IPMI-O
only)
1-19
28. LAN controller setting (3-pin LAN_SW1, LAN_SW2) 1-20
29. CPU sockets 1-7
To Next Page
Loading...
Need help?
General
