Atag i Series Installation & Servicing Instructions

Installation & Servicing instructions ATAG iC-Range
40
12.1 Change the Domestic Hot Water setpoint temperature
1 From the controller Home screen, press OK.
2 Turn the selector wheel to highlight Complete Menu.
Press OK.
3 Turn the selector wheel to highlight DHW Settings.
Press OK.
4 Option DHW Comfort Setpoint Temp is highlighted.
Press OK.
5 The current DHW comfort Setpoint temperature is displayed.
Press OK.
7 Turn the selector wheel until the desired temperature appears on the
screen.
Press OK.
Available temperature settings:
10˚C - 65˚C

Atag i Series Specifications

General

Brand	Atag
Model	i Series
Category	Boiler
Language	English