50
12.7 Boiler information
To gain access to the Boiler information, proceed as follows:
The Boiler information is accessable through a code.
1 From the controller Home screen, press the BACK and OK buttons at the
same time for 7 seconds.
2 Turn the selector wheel to highlight 007 as the Technical Code.
Press OK.
3 Turn the selector wheel to highlight Complete Menu.
Press OK.
It is now loading the menu.
As an example we take the CH Flow Set T.
4 Turn the selector wheel to highlight 8 Service Parameters.
Press OK.
4 Option 8.3 Boiler Temperature is highlighted.
Press OK.
5 Option 8.3.0 CH Flow Set T is highlighted.
Press OK.
The screen left appears.
To Next Page
Loading...
Need help?
General
