Atag i Series Installation & Servicing Instructions

Installation & Servicing instructions ATAG iC-Range
48
12.5 Change the time and date
1 From the controller Home screen, press OK.
2 Turn the selector wheel to highlight Complete Menu.
Press OK.
3 Turn the selector wheel to highlight Screen Settings.
Press OK.
4 Turn the selector wheel to highlight Time & Date.
Press OK.
5 Turn the selector wheel to highlight the desired eld.
Press OK.
The relevant eld starts to ash.
Turn the selector wheel to to select the correct value.
Press OK.
After correctly lled in all elds, Press Save.
The message in the screen left appears.
The settings are saved.

Atag i Series Specifications

General

Brand	Atag
Model	i Series
Category	Boiler
Language	English