FlexiROC T35 R/T40 R 3 Technical data
17 No: 3171473547.1 en
3 Technical data
3.1 FlexiROC T35 R/T40 R
3.1.1 Weight (Standard equipment Without drill steel)
Description Data
FlexiROC T35 R Weight 14,500 kg
FlexiROC T40 R Weight 14,500 kg
3.1.2 Performance
Description Data
Diesel engine, CAT C7.1 output
at 2200 rpm
168 KW
Temperature range in operation -25º to +50ºC
Tramming speed, max. 3,1/1,5 km/h
Traction force (low/high gear) 115/81 kN
Ground pressure, average 0,085 N/mm 2
Ground clearance 450 mm
Max. hydraulic pressure 250 bar
Track oscillation ±12º
Noise level Idling (1500 rpm)
Max. engine speed (2200 rpm)
Drilling (2000 rpm)
3.1.3 Tilt angles FlexiROC T35 R / ROC T40 R
!
NOTE: Stability is specified with respect to CE standards stipulating that rigs must not
be operated on inclinations steeper than 20 degrees without the use of a winch.
NOTE: ANGLES MUST NOT BE COMBINED!
Description Data
Inclination angles for drill rig
when drilling:
longitudinally, max. (Downward/
Upward)
20°/20º
lateral (left/right). 14°/15º
To Next Page
Loading...
Need help?
General
