Atlas Copco FlexiROC T35 R User Manual

FlexiROC T35 R/T40 R 8 Drilling
99 No: 3171473547.1 en
8 Drilling
8.1 Start of drilling
WARNING
Serious injury
Danger of accidental operation
u May cause serious personal injury and damage to property
u The operator must always control of the rig and the remote control box
u Always check that the controls are correctly adjusted before operating
u Always deactivate the remote control box when not in use
u The remote control box must not be operated from the rig when the winch is being used
Remote control box.
1.
Put the remote control box in DRILLING mode. Knob S130, position (g).
2.
Check that the track oscillation cylinders are locked. Switch S445, position (a).
3.
Check that the dust collector is activated. When flushing air is activated later, the dust
collector suction will start. Switch S181, position (a).
4.
Load the compressor. Switch S180 on the diesel panel, position (a).

Atlas Copco FlexiROC T35 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T35 R
Category	Construction Equipment
Language	English