Atlas Copco FlexiROC T35 R User Manual

FlexiROC T35 R/T40 R 6 Operating
92 No: 3171473547.1 en
Left: The winch lock mechanism is completely disengaged. Right: The winch lock
mechanism is fully engaged.
10.
Reverse up the incline using the tramming levers. Make sure that the wire is kept taut
constantly.
6.9.3 Tramming down inclines
1.
Check that the track oscillation lock is deactivated. Switch S445, position (a).
2.
Fasten the eyelet to the anchorage point.
3.
Set the traction of the winch to max. pressure by turning the potentiometer clockwise.
Potentiometer R106.
4.
Activate the winch circuit. Switch S172, position (a).
5.
Reduce the winch cable pressure gradually until the drill rig can be driven smoothly
down the incline with a suitable counterbalance from the winch. Make sure that the
cable remains taut constantly.
!
NOTE: The winch will work (inwards) simultaneously while the tramming levers are ac-
tivated

Atlas Copco FlexiROC T35 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T35 R
Category	Construction Equipment
Language	English