STa 6000 User Guide System Overview
9836 8243 01 Edition 3.1 27 (324)
2.2.2 STa 6000 connected to Torque Supervisor
The STa 6000 QC and AA versions can work in conjunction with Torque Supervisor. The communication
is performed trough USB, network cable or IRC-W.
In this application Torque Supervisor generates and sends to the STa 6000 the list of tests to be done (the
!"s, Torque Supervisor downloads the results and stores them in the
tool statistics.
The ToolsTalk BLM is necessary only for settings of the STa 6000; for basic operation of the STa 6000
with Torque Supervisor, it can be not necessary. In the typical application the Torque Supervisor is
installed in one or more dedicated PC, and ToolsTalk BLM on another one. However, they can run on the
same PC.
NOTE: Refer to the Working with Torque Supervisor
To Next Page
Loading...
Need help?
General
