System Overview STa 6000 User Guide
28 (324) 9836 8243 01 Edition 3.1
2.3 Presentation
The STa 6000 is modular. The following items are delivered with the STa 6000 package:
STa 6000 Controller
(STa 6000 PLUS 1)
The main module of the STa 6000, which contains all the
hardware and firmware.
Controller is provided without battery.
External Power Supply (P/N 4612 0300 21) (delivered with the STa
6000 package)
Power supply. If battery and battery charger are used, the external
power supply is not strictly necessary.
Battery cover (delivered with the STa 6000 package)
This battery cover must be installed in the STa 6000 when the
battery is not used (STa 6000 powered by the external power
supply).
Nylon Strap (delivered with the STa 6000 package)
The nylon strap can be attached to the STa 6000 for
easy portability. It is allowed to tie the Nylon Strap on
the own belt.
Torx wrench (delivered with the STa 6000 package)
This wrench is used to remove the STa 6000 back cover to install
the RBU or IRC-W module or Barcode module.
Attach here the
nylon strap
To Next Page
Loading...
Need help?
General
