Atlas Copco STa 6000 User Manual

System Overview STa 6000 User Guide
32 (324) 9836 8243 01 Edition 3.1
The STa 6000 is ready for the use:
NOTE: Once the STa 6000 is assembled with the IRC-W / IRC-B radio module(s), it is not
recommended to work by placing it either close to the head or close to the reproductive system.
The next paragraphs describe all the STa 6000 modules and user interfaces in detail.
NOTE: To start working with the STa 6000 immediately, Getting Started
with STa6000
2.3.2 RBU
RBU (Rapid Backup Unit) is a memory chip which defines which functions are
activated and provides backup for the test programs.
It stores also the specific settings of the own STa 6000 (STa6000
Factory Settingsthe default configuration); by installing the RBU in another STa
6000 it is possible to get an exact copy of the original one (except for test results, stored
in the STa 6000 memory and not in the RBU).
Display
Buzzer
Barcode reader
Keyboard
External power
supply connector
Mini USB port
Network
Connector for
transducers

Atlas Copco STa 6000 Specifications

General

Brand	Atlas Copco
Model	STa 6000
Category	Measuring Instruments
Language	English