Atlas Copco STa 6000 User Manual

System Overview STa 6000 User Guide
34 (324) 9836 8243 01 Edition 3.1
2.3.3 QAT Barcode reader
The QAT Barcode reader is a module to be installed into the STa 6000 to permit
scanning of barcodes.
An identifier, or barcode string, may be used to select the tightening program to be
executed, identify motor vehicles (VIN) and other work pieces, variants and
operators. The tightening result can then be saved together with this information.
To install the barcode reader module, turn off the STa 6000, remove the cover (by removing the two
screws) and insert the module (tighten the two screws):
NOTEIdentifier##
QAT Barcode

Atlas Copco STa 6000 Specifications

General

Brand	Atlas Copco
Model	STa 6000
Category	Measuring Instruments
Language	English