Atlas Copco STa 6000 User Manual

System Overview STa 6000 User Guide
30 (324) 9836 8243 01 Edition 3.1
QAT IRC-B radio module (P/N 8059 0920 10)
Radio module for interfacing the STa 6000 with printer, Torque
Supervisor and ToolsTalk BLM.
It is possible to install one or two radio modules in the STa
6000.
QAT IRC-W dual band radio module (P/N 8059 0920 15)
Radio module for interfacing the STa 6000 with printer, Torque
Supervisor and ToolsTalk BLM.
It is possible to install one or two radio modules in the STa
6000.
SRTT-L main plate (P/N 8059 0955 85)
Torque transducer to be installed on the STa 6000 to create a
single unit with the transducer and the measurement system.
Mechanical joint simulators are also available to test power an
impulse tools on the SRTT-L.
USB / Serial Adapter (P/N 8059 0956 74)
This box is used to connect the STa 6000 to the Power Focus and
PowerMACS for calibration.
STa 6000 Stand (P/N 8059 0956 73)
This stand MUST be installed on
the back of the STa 6000. It is not
allowed to insert the STa 6000
Stand into the own belt. It may get
an easy reading once it is leaned on
a desk.

Atlas Copco STa 6000 Specifications

General

Brand	Atlas Copco
Model	STa 6000
Category	Measuring Instruments
Language	English