STa 6000 User Guide System Overview
9836 8243 01 Edition 3.1 29 (324)
The following are additional modules for the STa 6000:
STa 6000 RBU (Rapid Backup Unit)
(RBU QC )
(RBU AA P/N 8059 0956 63)
Module to be installed in the STa 6000. It defines the STa 6000
type and stores test programs, tools and transducers archives,
STa 6000 configuration.
If not used, the STa 6000 works as STa 6000 Basic.
ToolsTalk BLM (P/N 8059 0981 10)
The STa 6000 management software. It features STa 6000
programming, STa 6000 configuration, retrieving results and
traces from the STa 6000.
STa 6000 Battery (P/N 8059 0955 61)
Power supply.
NOTE: Battery is optional. The STa 6000 can be powered also by
the external power supply.
Battery charger adapter (P/N 8059 0955 75)
The STa 6000 battery can be recharged when installed in the
unit by the external power supply, or on the specific battery
charger.
The battery charger is the same of the STwrench; it requires the
adapter to recharge the STa 6000 battery.
QAT Barcode module (P/N 8059 0920 12)
Module for scanning barcode labels on assembly components
for easy traceability.
It cannot be installed on the STa 6000 Basic.
To Next Page
Loading...
Need help?
General
