Atlas Copco STa 6000 User Manual

System Overview STa 6000 User Guide
38 (324) 9836 8243 01 Edition 3.1
2.3.6 External power supply
The external power supply provides power to the instrument, and it also charges the battery when the
battery is installed in the STa 6000. The battery is charged even if the STa 6000 is switched off.
The battery icon on the STa 6000 shows the recharging process only when the STa 6000 is switched on.
Connect the external power supply to AC power 100 ÷ 230 VAC 50/60 Hz, and plug the connector into
the STa 6000.
WARNING: Use only the power supply ordered from Atlas Copco. Warranty does not cover
damages to the STa 6000 caused by the use of a different external power supply.
2.3.7 SRTT-L
The SRTT-L is a torque
transducer to be installed on the
STa 6000 to create a single unit
with the transducer and the
measurement system.
External power
supply
Connector for
external power
supply
Transducer
Connector
Lever

Atlas Copco STa 6000 Specifications

General

Brand	Atlas Copco
Model	STa 6000
Category	Measuring Instruments
Language	English