Axon TASER 10 VR User Manual

 7. When the controller and headset are paired, a confirmation appears onscreen,
the Pairing LED turns green , and Simulator Training launches.
The TASER VRC will remain paired to the headset even if turned off or the battery is
removed.
If pairing fails, the Pairing LED will remain blue ; cycle the Selector switch off/on,
wait three seconds, and retry step 6.
Don’t hold the App button for nine seconds or the TASER VRC will enter Sleep mode. It
will also go to sleep after being idle 30 seconds to save battery (see Sleep mode on
page 5).
Pairing using headset settings
You can also pair using the headset settings menu.
 1. Turn the headset on by pressing the power button for about five seconds.
 2. In the headset library, use hand-tracking and pinch to select Settings.
TASER 10 VR Controller User Guide
Axon Enterprise, Inc. 12

Axon TASER 10 VR Specifications

General

Brand	Axon
Model	TASER 10 VR
Category	Controller
Language	English