Axon TASER 10 VR User Manual

Introduction
The TASER 10 VR Controller (VRC) is a firmware-updatable LED controller used in
conjunction with a virtuality reality (VR) headset. Manufactured by Axon Enterprise,
Inc., the TASER VRC is a dedicated training device designed to replicate the weight
and feel of a traditional TASER 10 device.
Using a proprietary 2.4 GHz protocol, advanced IR LED Constellation tracking
technology provides accurate three-dimensional physiology of the TASER VRC for
inside-out tracking of objects within a virtual reality environment. It provides
continuous TASER VRC-to-headset data exchange, letting you interact in a virtual
world with the device mimicking the standard functionality of a duty TASER 10 device,
such as arming, aiming, and deployment. This creates a true-to-life training
experiencewithout the challenges associated with TASER 10 being classified as a
firearm.
Because it uses the same battery pack as a TASER 7 or duty TASER 10, the TASER
VRC can apply agency settings from Axon Evidence. Like a duty TASER 10 device,
when a battery is docked, agency configurations and operation are downloaded to
memory within the battery and read by the TASER VRC when powered on.
Health and safety warnings
White TASER 10 VR Controllers are only for use in virtual reality (VR) training
environments. They will neither accept nor fire probes like a duty TASER 10.
The most current safety and health warnings are available in a PDF located on our
Legal page at https://axon-2.cdn.prismic.io/axon-2/5bac101c-6f81-4c02-b737-
b1be5eac6fce_Axon+VR+Warnings.pdf.
The safety and health warnings are to reduce the risk of any personal injury or
property damage. Read this manual and that document fully before using a VR
headset.
TASER 10 VR Controller User Guide
Axon Enterprise, Inc. 1

Axon TASER 10 VR Specifications

General

Brand	Axon
Model	TASER 10 VR
Category	Controller
Language	English